How To Factory Reset Samsung Tablet With Broken Screen?

After the reset is complete, the tablet should be restored to its factory settings. You will be able to access all of the device’s features again, but you may still need to replace the broken screen. If you don’t have the skills or tools to do this yourself, you should consider taking your tablet to a qualified service center. They can replace the screen and get your device back up and running in no time.

How do I factory reset my Samsung when the screen is broken?

  1. Press and hold the Power button for 10-15 seconds, or until your device powers off.
  2. Once the device is powered off, press and hold the Volume Down button and the Power button simultaneously for 10-15 seconds.
  3. Once this is done, you’ll see a menu appear on the screen. Use the Volume buttons to navigate to the “wipe data/factory reset” option, and press the Power button to select it.

That’s it! You’ve successfully factory reset your Samsung device with a broken screen.

How do I factory reset my tablet with a cracked screen?

First, you need to locate the reset button on your device. This is typically located on the back or side of the tablet, and may be a small hole or indentation. If the reset button is not accessible due to the cracked screen, you will need to locate the service port on the device. This is usually a small hole or slot on the back or side of the device.

Once you have found the reset button or service port, you will need to use a paper clip or similar device to press and hold the reset button or insert the paper clip into the service port. Hold the button down for at least 20 seconds, and then release the button or remove the paper clip. The tablet should now be reset to factory settings.

If the tablet does not reset, you may need to remove the battery from the device and then re-insert it. Once the battery is re-inserted, press and hold the reset button or insert the paper clip into the service port again. The tablet should now be reset to its factory settings.

How do I force my Samsung to factory reset?

  1. First, turn off your Samsung device.
  2. Once your device is completely shut down, press and hold the Volume Up + Home + Power buttons at the same time until the Samsung logo appears on the screen.
  3. Once the logo appears, release the buttons and wait for the Android Recovery menu to appear.
  4. You can now use the Volume buttons to navigate through the menu and select “wipe data/factory reset” by pressing the Power button.
  5. After you’ve selected the option, press the Power button again to confirm and initiate the process.
  6. Once the reset is complete, select “reboot system now” and press the Power button to restart your device.
  7. Your device will now restart and take you through the initial setup process.

How do I reset my phone if the screen isnt working?

  1. Find a way to turn the phone off. If the screen is not working, you may need to locate the power button and press and hold it for several seconds.
  2. Once the phone is turned off, press and hold the power button and volume up button at the same time.
  3. Once the phone has booted up, select the “reboot” or “reset” option.
  4. Select “Erase All Data” or “Factory Reset”.
  5. Enter your PIN or password if asked.
  6. Wait for the phone to reset and reboot.
  7. Once the phone has rebooted, you should be able to use it as normal.

The Bottom Line

The process of factory resetting a Samsung tablet with a broken screen can be quite tricky, and it is important to take the necessary steps to ensure that the device is properly reset. With that said, it is possible to reset a Samsung tablet with a broken screen, and you can do so by using a USB connection, the Recovery Mode, or by using the Odin Tool. When done correctly, the factory reset process should restore the tablet to its original state and allow you to start fresh with a new set up.

Similar Posts